Name Belt Gray and Black Skull Engraved for Men and Women
Description
Skull design embossed gray and black leather belt with name laser engraved on center back (visible) for Men and Women
Made in High Springs, Florida
9 - 10 oz (3.5mm) thick one piece full grain vegetable tanned cowhide leather
Our belts are cut with the design facing up and when you put the belt on .. you start to the left. If you need a left handed belt not a problem; please let us know when checking out
Snap, Buckle closure so you can easily change buckles
1 1/2 inches wide with 7 holes punched - Silver belt buckle and leather keeper included
We use a laser engraver to burn the name into the leather, then apply a dark antique finish to darken and seal the name. A durable lacquer finished is used on every belt so no need to use any oils, they are ready to wear
Sizing Instructions
Please measure according to our directions; No returns of exchanges on personalized belts size guide
Measure an existing belt for the proper belt size to order; Measure from the fold to the hole you use and order that size (see diagram)
Sizes of pants vary wildly; this is why we use inches to measure belts. If you do not have access to an existing belt, MEN typically add at least 3 inches to their pant size. For WOMEN, if measuring is not an option please refer to the suggested sizing chart or
measure an existing belt, your pant size is NOT the same as the belt size